5 Star Centrestand
by Carl Phillips
What may be
difficult to see from the pictures is the method of attachment. The stand is attached by
two plates (one on each side) that fit between the footrest brackets and the frame, and
are held in place by the original footrest bracket bolts. Pretty simple installation,
though mine required a little fiddling with the holes because of less than perfect
alignment.
64 kB
|
204 kB
|
194 kB
|
62 kB
|
62 kB
|
64 kB
|
Jody adds: I had to spend some time filing down blobs of weld so that the stand would
retract enough to allow for moderate cornering. Even fully retracted, it touches down
under hard cornering. I also find it quite difficult to lever the bike up onto the stand.
|